diff options
Diffstat (limited to 'target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi')
| -rw-r--r-- | target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi | 226 |
1 files changed, 0 insertions, 226 deletions
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi b/target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi deleted file mode 100644 index 57652fb278..0000000000 --- a/target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi +++ /dev/null @@ -1,226 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "mt7621.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - aliases { - label-mac-device = &gmac0; - led-boot = &led_power_orange; - led-failsafe = &led_power_white; - led-running = &led_power_white; - led-upgrade = &led_net_orange; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - wps: wps { - label = "wps"; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds: leds { - compatible = "gpio-leds"; - - led_power_orange: power_orange { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_ORANGE>; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - - led_power_white: power_white { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - - led_net_orange: net_orange { - label = "orange:net"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - - net_white { - label = "white:net"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&nand { - status = "okay"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Bootloader"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "config"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "factory"; - reg = <0x100000 0x40000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - eeprom_factory_0: eeprom@0 { - reg = <0x0 0x4da8>; - }; - - eeprom_factory_8000: eeprom@8000 { - reg = <0x8000 0x4da8>; - }; - - macaddr_factory_e000: macaddr@e000 { - compatible = "mac-base"; - reg = <0xe000 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@140000 { - label = "config2"; - reg = <0x140000 0x40000>; - read-only; - }; - - partition@180000 { - label = "firmware"; - compatible = "openwrt,uimage", "denx,uimage"; - openwrt,padding = <96>; - reg = <0x180000 0x2800000>; - }; - - partition@2980000 { - label = "private"; - reg = <0x2980000 0x2000000>; - read-only; - }; - - partition@4980000 { - label = "firmware2"; - reg = <0x4980000 0x2800000>; - }; - - partition@7180000 { - label = "mydlink"; - reg = <0x7180000 0x600000>; - read-only; - }; - - partition@7780000 { - label = "reserved"; - reg = <0x7780000 0x880000>; - read-only; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi0: wifi@0,0 { - compatible = "mediatek,mt76"; - reg = <0x0000 0 0 0 0>; - nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_e000 1>; - nvmem-cell-names = "eeprom", "mac-address"; - ieee80211-freq-limit = <2400000 2500000>; - - led { - led-active-low; - }; - }; -}; - -&pcie1 { - wifi1: wifi@0,0 { - compatible = "mediatek,mt76"; - reg = <0x0000 0 0 0 0>; - nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_e000 2>; - nvmem-cell-names = "eeprom", "mac-address"; - ieee80211-freq-limit = <5000000 6000000>; - - led { - led-active-low; - }; - }; -}; - -&gmac0 { - nvmem-cells = <&macaddr_factory_e000 0>; - nvmem-cell-names = "mac-address"; -}; - -&gmac1 { - status = "okay"; - label = "wan"; - phy-handle = <ðphy4>; - - nvmem-cells = <&macaddr_factory_e000 3>; - nvmem-cell-names = "mac-address"; -}; - -&mdio { - ethphy4: ethernet-phy@4 { - reg = <4>; - }; -}; - -&switch0 { - ports { - port@0 { - status = "okay"; - label = "lan4"; - }; - - port@1 { - status = "okay"; - label = "lan3"; - }; - - port@2 { - status = "okay"; - label = "lan2"; - }; - - port@3 { - status = "okay"; - label = "lan1"; - }; - }; -}; - -&state_default { - gpio { - groups = "i2c", "uart3", "jtag", "wdt"; - function = "gpio"; - }; -}; |