summaryrefslogtreecommitdiffstats
path: root/target/linux/bmips
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 6.1 to 6.1.60John Audia2023-10-261-1/+1
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.60 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: ath79, bmips: refresh 5.15 patchesMarek Behún2023-10-231-1/+1
| | | | | | | One LED patch for ath79 and one LED patch for bmips need to be refreshed. Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: bump 6.1 to 6.1.53John Audia2023-09-232-3/+3
| | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.53 Removed upstreamed: bcm53xx/patches-6.1/032-v6.6-0005-ARM-dts-BCM53573-Drop-nonexistent-usb-cells.patch[1] bcm53xx/patches-6.1/032-v6.6-0006-ARM-dts-BCM53573-Add-cells-sizes-to-PCIe-node.patch[2] bcm53xx/patches-6.1/032-v6.6-0007-ARM-dts-BCM53573-Use-updated-spi-gpio-binding-proper.patch[3] bcm53xx/patches-6.1/032-v6.6-0011-ARM-dts-BCM53573-Fix-Tenda-AC9-switch-CPU-port.patch[4] All other patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.53&id=ee1d740374aa73fb32857685eb05167ad87458cf 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.53&id=ab5154ae26c446136827451e907db45d7b92a76f 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.53&id=f5ff6897094fa161be55786cb9e5d5b1bf7a9049 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.53&id=0ef736fec61422794c4a991d46c4ec212b01d8d1 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.44John Audia2023-08-092-3/+3
| | | | | | | | | | | | Changelog: https://lore.kernel.org/stable/2023080822-repost-unfiled-2f01@gregkh/ All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.125John Audia2023-08-092-2/+2
| | | | | | | | | | 1. Add new symbols to generic config 2. Bump kernel Changelog: https://lore.kernel.org/stable/2023080818-groin-gradient-a031@gregkh/ All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.37John Audia2023-07-052-3/+3
| | | | | | | | | | Manually rebased: generic/hack-6.1/220-arm-gc_sections.patch armsr/patches-6.1/221-armsr-disable_gc_sections_armv7.patch All other patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: migrate FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER for 6.1Stefan Kalscheuer2023-06-256-6/+0
| | | | | | | | | | The flag FORCE_MAX_ZONEORDER was renamed to ARCH_FORCE_MAX_ORDER in Kernel 6.1 [1]. Rename the flag in generic Kconfig and remove it from target configs. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0192445cb2f7ed1cd7a95a0fc8c7645480baba25 Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* kernel: bump 6.1 to 6.1.35John Audia2023-06-232-3/+3
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.118John Audia2023-06-232-2/+2
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* bmips: add support for Arcadyan AR7516Daniel González Cabanelas2023-06-225-0/+208
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Arcadyan AR7516, AKA Orange Bright Box or EE Bright Box 1, is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. It comes with a horizontal stand black shiny casing. Newer Bright Box 1 model stands vertically, and comes with a totally different board inside, not compatible with this firmware. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 8 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43227 802.11bgn (onboard) - USB: 1x 2.0 - ADSL: yes, unsupported - Buttons: 2x - LEDs: 9x, power LED is hardware controlled - UART: yes Installation in two steps, new CFE bootloader and firmware: Install new CFE: 1. Power off the router and press the RESET button 2. Power on the router and wait some seconds 3. Release the RESET button 3. Browse to http://192.168.1.1, this web interface will offer both firmware (“Software”) upgrade and bootloader upgrade; be sure to use the bootloader section of the upload form. 4. Upload the new CFE (availabe at the wiki page) 5. Wait about a minute for flashing to finish and reboot into the new bootloader. Install OpenWrt via new CFE web UI: 1. After installing the new CFE, visit http://192.168.1.1 2. Upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: add support for NuCom R5010UNv2Daniel González Cabanelas2023-06-195-2/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | The NuCom R5010UNv2 is a wifi fast ethernet router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43217 802.11bgn (onboard) - USB: 1x 2.0 - Buttons: 2x - ADSL: yes, unsupported - LEDs: 7x - UART: yes Installation via CFE web UI: 1. Power off the router and press the RESET button 2. Power on the router and wait 12 or more seconds 3. Release the RESET button 4. Browse to http://192.168.1.1 and upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: enable the data Read Ahead Cache for BMIPS4350Daniel González Cabanelas2023-06-182-0/+84
| | | | | | | | | | | | | The data RAC is left disabled by the bootloader in some SoCs, at least in the core it boots from. Enabling this feature increases the performance up to +30% depending on the task. The kernel enables the whole RAC unconditionally on BMIPS3300 CPUs. Enable the data RAC in a similar way also for BMIPS4350. Tested on DGND3700 v1 (BCM6368) and HG556a (BCM6358). Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: fix DMA RAC flushÁlvaro Fernández Rojas2023-06-182-0/+166
| | | | | | BMIPS_GET_CBR() returns an invalid address on some SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add support for Comtrend VG-8050Álvaro Fernández Rojas2023-06-164-0/+258
| | | | | | | | | | | | | | | | | | | | | | | | | | The Comtrend VG-8050 is a wifi gigabit ethernet router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM63169 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 128 MB DDR - Flash: 128 MB NAND - LAN switch: Broadcom BCM53125, 5x 1Gbit - Wifi 2.4 GHz: SoC (BCM63268) 802.11bgn - USB: 1x 2.0 (optional) - Buttons: 2x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: dts: dgnd3700: fix WAN portÁlvaro Fernández Rojas2023-06-151-1/+1
| | | | | | | All switch ports are labeled as port@address so let's follow the same pattern. Fixes: ed79519b8d89 ("bmips: add support for Netgear DGND3700 v1, DGND3800B") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add support for Sercomm AD1018Álvaro Fernández Rojas2023-06-155-0/+353
| | | | | | | | | | | | | | | | | | | | | | | | The Sercomm AD1018 is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB (v1) / 128 MB (v2) DDR - Flash: 128 MB NAND - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43217 802.11bgn - USB: 1x 2.0 - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: bump LOADER_ENTRY to RAM + 16MÁlvaro Fernández Rojas2023-06-151-1/+1
| | | | | | | This is needed on devices like Sercomm AD1018 for booting recent kernels due to bigger kernels. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add support for Actiontec R1000HDaniel González Cabanelas2023-06-155-0/+241
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Actiontec R1000H is a gigabit wifi router, 2.4 GHz single band with two external antennas. It comes with a coaxial HomePNA port. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 64 MB DDR - Flash: 32 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - LAN coaxial : 1x HPNA 3.1, CG3211 + CG3213 - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn - USB: 1x 2.0 - Buttons: 2x, 1 reset - LEDs: 7x - UART: yes The HPNA hardware probably needs a firmware to make the coaxial port work. In the OEM firmware, it's apparently sent with an utility (inhpna) through the ethernet port. Installation via CFE web UI: 1. Connect the UART serial port. 2. Power on the router and press enter at the console prompt to stop the bootloader. 4. Browse to http://192.168.1.1 and upload the OpenWrt CFE firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: switch to standard nand_do_upgradeÁlvaro Fernández Rojas2023-06-154-45/+4
| | | | | | | Now that JFFS2 cleanmarkers are supported on the standard nand_do_upgrade function we can start using it on bmips. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: fix NETGEAR DGND3700v2 boot loopÁlvaro Fernández Rojas2023-06-141-0/+1
| | | | | | | | | | | | The DGND3700v2 renames the cferam bootloader from cferam to cfeXXX, where XXX is the number of firmware upgrades performed by the bootloader. Other bcm63xx devices rename cferam.000 to cferam.XXX, but this device is special because the cferam name isn't changed on the first firmware flashing but it's changed on the subsequent ones. Therefore, we need to look for "cfe" instead of "cferam" to properly detect the cferam partition and fix the bootlop. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add support for Comtrend AR-5381uÁlvaro Fernández Rojas2023-06-124-0/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | The Comtrend AR-5381u is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB DDR - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43225 802.11bgn - USB: 1x 2.0 - Buttons: 1x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add support for Comtrend WAP-5813nÁlvaro Fernández Rojas2023-06-115-0/+249
| | | | | | | | | | | | | | | | | | | | | | | | | | The Comtrend WAP-5813n is a wifi gigabit router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6369 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 64 MB DDR - Flash: 8 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - Wifi 2.4 GHz: miniPCI Broadcom BCM4322 802.11bgn - USB: 1x 2.0 (optional) - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add support for Comtrend VR-3025unÁlvaro Fernández Rojas2023-06-114-0/+200
| | | | | | | | | | | | | | | | | | | | | | | | | | The Comtrend VR-3025un is a wifi gigabit router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 64 MB DDR - Flash: 8 MB parallel NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43222 802.11bgn - USB: 1x 2.0 - Buttons: 1x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the antenna. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: dgnd3700v1/dgnd3800b: add missing kmod-leds-gpioÁlvaro Fernández Rojas2023-06-111-2/+4
| | | | | | | Commit ed79519b8d89 missed adding kmod-leds-gpio to these devices. Fixes: ed79519b8d89 ("bmips: add support for Netgear DGND3700 v1, DGND3800B") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: image: rename Device/bcm63xx_netgearÁlvaro Fernández Rojas2023-06-112-4/+4
| | | | | | | Every other Device definition in the target is using hyphens instead of underscores. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: dts: improve and align device tree filesÁlvaro Fernández Rojas2023-06-1112-71/+40
| | | | | | | Align all the device tree files and follow the same criteria before more devices are ported from bcm63xx and this goes out of control. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add support for Netgear EVG2000Daniel González Cabanelas2023-06-115-1/+260
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Netgear EVG2000 is a wifi gigabit router, 2.4 GHz single band with two internal antennas integrated in the main PCB. Hardware: - SoC: Broadcom BCM6369 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 64 MB DDR - Flash: 16 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn - USB: 2x 2.0 - Buttons: 2x, 1 reset - LEDs: 10x - FXS: 2x - UART: yes Installation via CFE web UI: 1. Power off the router and make a temporal TX-RX shortcircuit on the serial pins. 2. Power on the router and wait 3 or more seconds 3. Remove the TX-RX shortcircuit 4. Browse to http://192.168.1.1 or http://192.168.0.1 and upload the firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: add support for Netgear DGND3700 v1, DGND3800BDaniel González Cabanelas2023-06-107-0/+334
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Netgear DGND3700 v1 and DGND3800B are the same device but with different factory firmwares. It's an xDSL wifi router with a slim black shiny casing and 4 PCB internal antennas connected via UFL to a miniPCI detachable card. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 128 MB DDR - NOR Flash: 32 MB parallel (CFE and OS) - NAND flash: 128 MB (empty) - Ethernet LAN: 5x 1Gbit - Wifi 2.4 GHz: Broadcom BCM43222 802.11bgn - Wifi 5 GHz: Broadcom BCM43222 802.11abgn - USB: 2x 2.0 - Buttons: 3x, 1 reset - LEDs: 11x - UART: yes Installation via OEM web UI: 1. Open the Netgear administration web interface, by default: http://192.168.0.1 user: admin password: password 2. Look for "upgrade firmware" and proceed 3. Wait some minutes until it finishes Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: bump LZMA Loader addressÁlvaro Fernández Rojas2023-06-091-1/+1
| | | | | | | | This allows booting bigger ramdisk images via TFTP at the cost of breaking 32M RAM compatibility, but those devices have been unable to boot ramdisks on this target for some time anyway due to not having enough RAM. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add support for Observa VH4032NDaniel González Cabanelas2023-06-095-2/+269
| | | | | | | | | | | | | | | | | | | | | | | | The Observa VH4032N is an xDSL wifi router with a vertical white casing and two internal antennas connected via UFL. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400MHz - RAM: 128 MB DDR - Flash: 32 MB parallel NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4/5 GHz: onboard Broadcom BCM43222 802.11abgn - USB: 3x 2.0 - Buttons: 2x, 1 reset - LEDs: 8x, blue and red - UART: 1x Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* kernel: bump 6.1 to 6.1.31Robert Marko2023-06-022-5/+6
| | | | | | | | | | All patches automatically rebased. Build system: x86_64/Fedora 38 Build-tested: ipq807x/Qnap 301W, ipq807x/Dynalink DL-WRX36 Run-tested: ipq807x/Qnap 301W, ipq807x/Dynalink DL-WRX36 Signed-off-by: Robert Marko <robimarko@gmail.com>
* bmips: enable testing kernel version with 6.1 versionÁlvaro Fernández Rojas2023-05-301-0/+1
| | | | | | Enable testing kernel version with 6.1 kernel version. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: 6.1: refresh config and add missing symbolsÁlvaro Fernández Rojas2023-05-306-18/+109
| | | | | | Refresh config for kernel 6.1 and add missing symbols. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: 6.1: refresh kernel patchesÁlvaro Fernández Rojas2023-05-308-26/+51
| | | | | | Refresh kernel patches for version 6.1. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: 6.1: copy patches, config from 5.15Álvaro Fernández Rojas2023-05-3020-0/+2957
| | | | | | Copy patches and config from 5.15 kernel version. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: enet: add compatibility with kernel 6.1Álvaro Fernández Rojas2023-05-302-10/+24
| | | | | | Make bmips ethernet drivers compatible with 6.1 kernel. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: improve kernel patchesÁlvaro Fernández Rojas2023-05-1714-185/+181
| | | | | | | Add missing patch headers and regenerate the ones that contain an obsolete patch header. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: 5.15: comment unused macronix_nand_block_protection_supportChristian Marangi2023-05-121-0/+154
| | | | | | | | | | | | Comment unused function macronix_nand_block_protection_support since it does cause boot problem Fix compilation error: drivers/mtd/nand/raw/nand_macronix.c:220:13: error: 'macronix_nand_block_protection_support' defined but not used [-Werror=unused-function] 220 | static void macronix_nand_block_protection_support(struct nand_chip *chip) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* bmips: fix external interrupt controllerÁlvaro Fernández Rojas2023-04-271-21/+2
| | | | | | | | | - irq_domain_add_simple() can't be used on bmips since interrupts aren't hardcoded with specific offsets for internal and external as opposed to bcm63xx. This is needed to avoid collisions with other interrupts. - remove unused bcm63xx-specific code. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: document GPIO external interruptsÁlvaro Fernández Rojas2023-04-2712-11/+51
| | | | | | | BCM63xx SoCs have an external interrupt controller which can be used for specific GPIO keys. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: increment polled keys interval to 100Álvaro Fernández Rojas2023-04-279-9/+9
| | | | | | | There's no need to poll the gpio keys every 20 ms and the linux kernel documentation suggests 100 ms. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: shg2500: add BCM4360 fallback SPROMÁlvaro Fernández Rojas2023-04-232-2/+16
| | | | | | | | Apart from the embedded BCM63268 wireless, this device has an external BCM4360 connected by PCIe which needs a fallback SPROM. b43 isn't enabled for this device because BCM4360 isn't supported (AC PHY). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: dgnd3700v2: add b43 wireless driverÁlvaro Fernández Rojas2023-04-231-0/+1
| | | | | | | | Apart from the embedded BCM6362 wireless, Netgear DGND3700v2 has external BCM43228 wireless connected by PCIe. Fallback SPROM isn't needed for this one because it has a physical SPROM. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: leds-sercomm-msp430: improve driverÁlvaro Fernández Rojas2023-04-231-3/+7
| | | | | | | - Add missing module functions. - Fix infinite pattern trigger by converting negative values to 0. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: enet: add missing module functionsÁlvaro Fernández Rojas2023-04-232-3/+14
| | | | | | | | | - Add missing MODULE_DEVICE_TABLE(). - Switch bcm6348-iudma to module_platform_driver(). - Add missing MODULE_AUTHOR, MODULE_DESCRIPTION, MODULE_LICENSE and MODULE_ALIAS. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: pci: use standard module functionsÁlvaro Fernández Rojas2023-04-233-24/+21
| | | | | | | late_initcall_sync() is no longer needed so standard module functions can be used on all bmips PCI/PCIe drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: drop custom b43-sprom fixupsÁlvaro Fernández Rojas2023-04-232-1199/+0
| | | | | | b43-sprom fixups and no longer used and can be removed from bmips targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: switch to generic bcma/ssb fallback SPROMÁlvaro Fernández Rojas2023-04-2312-64/+12
| | | | | | | | Stop using bmips b43-sprom fixups and switch to generic bcma/ssb fallback SPROMs. This way we don't need to include the b43-sprom fixups on devices without Broadcom wireless. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: pci-bcm6348: load IO resource from DT rangesÁlvaro Fernández Rojas2023-04-183-28/+14
| | | | | | Correctly load IO resource from DT ranges and remove the specific IO resource. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: drop unneeded ath9k fixupÁlvaro Fernández Rojas2023-04-182-243/+1
| | | | | | | We no longer need the custom ath9k fixup now that we're using the standard kmod-owl-loader. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-25 09:25:35 +0000