ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 839 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
new file mode 100644
index 000000000000..2873369a57c0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
@@ -0,0 +1,839 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+#include <dt-bindings/clock/imx6sll-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sll-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi3 = &ecspi3;
+		spi4 = &ecspi4;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points =
+				/* kHz    uV */
+				<996000  1275000>,
+				<792000  1175000>,
+				<396000  1075000>,
+				<198000	  975000>;
+			fsl,soc-operating-points =
+				/* ARM kHz      SOC-PU uV */
+				<996000         1175000>,
+				<792000         1175000>,
+				<396000         1175000>,
+				<198000		1175000>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6SLL_CLK_ARM>,
+				 <&clks IMX6SLL_CLK_PLL2_PFD2>,
+				 <&clks IMX6SLL_CLK_STEP>,
+				 <&clks IMX6SLL_CLK_PLL1_SW>,
+				 <&clks IMX6SLL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	ckil: clock-ckil {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-ipp-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-ipp-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
+		L2: cache-controller@a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		aips1: bus@2000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba: spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@2004000 {
+					compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
+						 <&clks IMX6SLL_CLK_OSC>,
+						 <&clks IMX6SLL_CLK_SPDIF>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_IPG>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "dma";
+					status = "disabled";
+				};
+
+				ecspi1: spi@2008000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI1>,
+						 <&clks IMX6SLL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI2>,
+						 <&clks IMX6SLL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI3>,
+						 <&clks IMX6SLL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI4>,
+						 <&clks IMX6SLL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart4: serial@2018000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
+						 <&clks IMX6SLL_CLK_UART4_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
+						 <&clks IMX6SLL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart2: serial@2024000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
+						 <&clks IMX6SLL_CLK_UART2_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi1: ssi@2028000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
+						 <&clks IMX6SLL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi2: ssi@202c000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
+						 <&clks IMX6SLL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi3: ssi@2030000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
+						 <&clks IMX6SLL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				uart3: serial@2034000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02034000 0x4000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-name = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
+						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			};
+
+			pwm1: pwm@2080000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM1>,
+					 <&clks IMX6SLL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm2: pwm@2084000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM2>,
+					 <&clks IMX6SLL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm3: pwm@2088000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM3>,
+					 <&clks IMX6SLL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm4: pwm@208c000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM4>,
+					 <&clks IMX6SLL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			gpt1: timer@2098000 {
+				compatible = "fsl,imx6sl-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
+					 <&clks IMX6SLL_CLK_GPT_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 50 32>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
+					      <&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
+					      <&iomuxc 21 6 11>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
+					      <&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
+					      <&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
+					      <&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
+					      <&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
+					      <&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
+					      <&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
+					      <&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
+					      <&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO5>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
+					      <&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
+					      <&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
+					      <&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
+					      <&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
+					      <&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
+					      <&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
+					      <&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
+					      <&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
+					      <&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
+					      <&iomuxc 21 137 1>;
+			};
+
+			gpio6: gpio@20b0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO6>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: keypad@20b8000 {
+				compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@20bc000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG1>;
+			};
+
+			wdog2: watchdog@20c0000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: clock-controller@20c4000 {
+				compatible = "fsl,imx6sll-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+
+				assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>;
+				assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>;
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6sll-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-mfd";
+				reg = <0x020c8000 0x4000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reg_3p0: regulator-3p0@20c8120 {
+					compatible = "fsl,anatop-regulator";
+					reg = <0x20c8120>;
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				tempmon: temperature-sensor {
+					compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-parent = <&gpc>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+				};
+			};
+
+			usbphy1: usb-phy@20c9000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usb-phy@20ca000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
+				phy-reg_3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x61>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			src: reset-controller@20d8000 {
+				compatible = "fsl,imx6sll-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: interrupt-controller@20dc000 {
+				compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+			};
+
+			iomuxc: pinctrl@20e0000 {
+				compatible = "fsl,imx6sll-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@20e4000 {
+				compatible = "fsl,imx6sll-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			csi: csi@20e8000 {
+				compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>,
+					 <&clks IMX6SLL_CLK_CSI>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "disp-axi", "csi_mclk", "disp_dcic";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@20ec000 {
+				compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_IPG>,
+					 <&clks IMX6SLL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				iram = <&ocram>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pxp: pxp@20f0000 {
+				compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp";
+				reg = <0x20f0000 0x4000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PXP>;
+				clock-names = "axi";
+			};
+
+			lcdif: lcd-controller@20f8000 {
+				compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
+					 <&clks IMX6SLL_CLK_LCDIF_APB>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			dcp: crypto@20fc000 {
+				compatible = "fsl,imx28-dcp";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DCP>;
+				clock-names = "dcp";
+			};
+		};
+
+		aips2: bus@2100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@2184000 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@2184200 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
+						"fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			usdhc1: mmc@2190000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@2194000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@2198000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			mmdc: memory-controller@21b0000 {
+				compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>;
+			};
+
+			rngb: rng@21b4000 {
+				compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb";
+				reg = <0x021b4000 0x4000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>;
+			};
+
+			ocotp: efuse@21bc000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6sll-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SLL_CLK_OCOTP>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+			};
+
+			audmux: audmux@21d8000 {
+				compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart",
+					     "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
+					 <&clks IMX6SLL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};