summaryrefslogtreecommitdiffstats
path: root/src/soc
Commit message (Collapse)AuthorAgeFilesLines
* soc/intel: transition full control over PM Timer from FSP to corebootMichael Niewöhner2021-10-177-2/+66
| | | | | | | | | | | | | | | | | | | Set `EnableTcoTimer=1` in order to keep FSP from 1) enabling ACPI Timer emulation in uCode. 2) disabling the PM ACPI Timer. Both actions are now done in coreboot. `EnableTcoTimer=1` makes FSP skip these steps in any possible case including `SkipMpInit=0`, `SkipMpInit=1`, use of the MP PPI or FSP Multiphase Init. This way full control is left to coreboot. Change-Id: I8005daed732c031980ccc379375ff5b09df8dac1 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lance Zhao
* soc/intel/{skl,cnl,dnv}: disable PM ACPI timer if chosenMichael Niewöhner2021-10-175-0/+32
| | | | | | | | | | | | | | | | Disable the PM ACPI timer during PMC init, when `USE_PM_ACPI_TIMER` is disabled. This is done to bring SKL, CNL, DNV in line with the other platforms, in order to transition handling of the PM timer from FSP to coreboot in the follow-up changes. For SKL and CNL, this temporarly redundantly disables the PM Timer, since FSP does that, too. This redundancy is resolved in the follow-up. Change-Id: I47280cd670a96c8fa5af107986496234f04e1f77 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* soc/intel: implement ACPI timer disabling per SoC and drop common codeMichael Niewöhner2021-10-1713-28/+5
| | | | | | | | | | | Since it's just a one-liner, implement disabling of the ACPI timer in soc code. This reduces complexity. Change-Id: I434ea87d00f6e919983d9229f79d4adb352fbf27 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* soc/intel: move disabling of PM Timer to SoC PMC codeMichael Niewöhner2021-10-1710-45/+45
| | | | | | | | | | | | | | | | | | | | Move disabling of PM Timer to SoC PMC code. The original reason for placing that in `finalize` [1] was FSP hanging due to use of the PM timer without enabling timer emulation first in coreboot, which was added later [2]. [1] commit 6c1bf27dae (intel/skylake: disable ACPI PM Timer to enable XTAL OSC shutdown) [2] commit f004f66ca7 (soc/intel/skylake: Enable ACPI PM timer emulation on all CPUs) Change-Id: I354c3aea0c8c1f8ff3d698e0636932b7b76125f7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* soc/intel/common: add possiblity to override GPE0 to acpi_fill_soc_wakeMichael Niewöhner2021-10-172-8/+10
| | | | | | | | | | | | Currently, only the PM1_STS mask gets passed to `acpi_fill_soc_wake`. To be able to override the GPE0_STS mask as well, also pass that one. To accomplish that, pointers to the variables are passed now. Change-Id: If9f28cf054ae8b602c0587e4dd4a13a4aba810c7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* soc/intel/common/acpi: drop `RTC_EN` from static wake bits maskMichael Niewöhner2021-10-171-1/+1
| | | | | | | | | | | | | | | `RTC_EN` is in the RTC well* so we can rely on the actual register content instead of statically overriding it. Drop it from the static wake bits mask. * Tested on clevo/l140cu Change-Id: Ia0ae71f0a472513233bc0fd5625faf15bf86beaf Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
* soc/intel: deduplicate acpi_fill_soc_wakeMichael Niewöhner2021-10-178-105/+1
| | | | | | | | | | | | The PM1_EN bits WAK_STS, RTC_EN, PWRBTN_EN don't need any SoC-specific handling. Deduplicate `acpi_fill_soc_wake` by setting these bits in common code. Change-Id: I06628aeb5b82b30142a383b87c82a1e22a073ef5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* soc/intel/skylake: switch to common GNVSMichael Niewöhner2021-10-172-91/+1
| | | | | | | | | | | | | | Switch to common GNVS. No additional fields to those being present in common GNVS are used by any SKL/KBL device. Thus, they're dropped completely. Change-Id: I87ab4ab05f6c081697801276a744d49e9e1908e0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
* soc/intel/common: add SGX fields to GNVSMichael Niewöhner2021-10-172-0/+7
| | | | | | | | | | | | | Add the SGX fields to the GNVS. This is required for Skylake to use the common GNVS. Change-Id: I0077260b7eb1bc2b2fe2af69ac039b38ca0e7423 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
* soc/amd/stoneyridge/include/iomap: rename I2C[ABCD]_BASE_ADDRESS definesFelix Held2021-10-164-16/+16
| | | | | | | | | | | | | | | | Picasso and Cezanne define and use APU_I2C[01234]_BASE for the base addresses of the I2C controllers, so align Stoneyridge with this. The ACPI device names aren't changed from I2C[ABCD] to I2C[0123] for now since this might change behavior in the OS and would also change the resulting binary of a timeless build. TEST=Timeless build results in identical image for Google/Treeya. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9c400c073eba5c14bd35703b717f75df89a8719d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58370 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/intel/dnv_ns: enable uCode PM Timer emulationMichael Niewöhner2021-10-162-0/+3
| | | | | | | | | | | Denverton-NS supports uCode PM Timer emulation, according to Intel doc#558579 rev2.2. Thus, enable it. Change-Id: I21f55816da9f5e240fdf01a0e92b67b09ef38599 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* soc/intel/pmc: add a note about legacy OSes/payloads to PM Timer KconfigMichael Niewöhner2021-10-161-0/+7
| | | | | | | | | | | | | | | | | | | Since ACPI 5.0A it is allowed to disable the ACPI Timer, when the according FADT flag `ACPI_FADT_PLATFORM_CLOCK` is unset. Starting with Skylake, most platforms (except Xeon-SP) support PM Timer emulation, so even legacy OSes and payloads should work fine with the hardware PM Timer disabled. However, when the `TMR_STS` functionality is required, some legacy OSes might still not work (properly). Add a note about this to the Kconfig help. Change-Id: I53f1814113902124779ed85da030374439570688 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lance Zhao
* soc/intel/{common,skl}: set ACPI_FADT_PLATFORM_CLOCK based on KconfigMichael Niewöhner2021-10-162-4/+8
| | | | | | | | | | | | | | | | | | | | | The FADT contains a flag `ACPI_FADT_PLATFORM_CLOCK` telling the OSPM if a specification-compliant PM Timer is present. Currently, this flag is set regardless of the timer being enabled or disabled. To be specification-compliant, only set that flag, when the hardware PM Timer is enabled. This changes behaviour of all mainboards defaulting to USE_PM_ACPI_TIMER=n. Note: On platforms supporting uCode PM ACPI Timer emulation, this is required, too, because emulation does not support `TMR_STS`. Any OS or software checking this flag and thus relying on the overflow flag would not work (properly). Change-Id: Id2e5d69b5515c21e6ce922dab2cb88b494c65ebe Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* soc/amd/common: move configure_espi_with_mb_hook implementationFelix Held2021-10-152-5/+8
| | | | | | | | | | | Move the actual implementation of configure_espi_with_mb_hook out of the header file and into the espi_util.c file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1106e69a52bf329a41e8e12fd09db846310b102a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/amd: make configure_espi_with_mb_hook call conditionalFelix Held2021-10-153-10/+13
| | | | | | | | | | | | | If a system doesn't use eSPI or has the eSPI interface already configured in verstage on PSP, not calling configure_espi_with_mb_hook from fch_pre_init makes it a bit more obvious that the eSPI interface initialization will be skipped. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia77b83d56a5dab1bac6cfbbd92d33aa60a9e8b89 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/amd/common/include/espi: rename configure_espiFelix Held2021-10-153-3/+3
| | | | | | | | | | | | Rename configure_espi to configure_espi_with_mb_hook to clarify that this function will call into the mb_set_up_early_espi function in the mainboard-specific code if it exists. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5d0f099288b0100242629c736dd69a8add977b5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/amd/stoneyridge/acpi/sb_fch: use I2C[ABCD]_BASE_ADDRESS definesFelix Held2021-10-151-4/+4
| | | | | | | | | | | | | | Now that the I2C[ABCD]_BASE_ADDRESS defines aren't macros that calculate the MMIO addresses any more, those defines can also be used in the ACPI code. TEST=Timeless build results in identical image for Google/Treeya. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7de2f83dc2f8061d8f1735caf10314bcddb2d3fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/58337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/amd/stoneyridge/include/iomap: drop I2C_BUS_ADDRESS(x) macroFelix Held2021-10-151-7/+4
| | | | | | | | | | | | | | | The I2C_BUS_ADDRESS(x) macro isn't used to iterate over the I2C controller base addresses, so drop this and use the fixed MMIO address for the I2C[ABCD]_BASE_ADDRESS defines instead which also allows using those defines in the ACPI code. TEST=Timeless build results in identical image for Google/Treeya. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idd7484a0322dc5167cbb7fdcd9a2583f0dbed50e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/amd/common/block/i2c: implement proper read_resourceFelix Held2021-10-155-22/+6
| | | | | | | | | | | | | | | | Before this patch the reservation of the MMIO region of the I2C controllers was done in the LPC controller PCI device despite the I2C controllers already being devices in the devicetree. This patch implements this functionality as read_resources function of the I2C device instead. This will only reserve the memory when the I2C devices are enabled in devicetree which is a change from the previous behavior. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I67c853df3be2f593ecfa113ae2f74e5df7cf74e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58307 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/intel/common/cse: Split CSE metadata into two CBFS filesFurquan Shaikh2021-10-154-53/+86
| | | | | | | | | | | | | | | | | | | | | | | This change splits CSE metadata structure (added to CBFS) into two separate CBFS files (me_rw.hash and me_rw.version). Since `struct cse_rw_metadata` is now used, it is dropped completely. This change is being made in order to prepare for the upcoming changes to stitch CSE binary at build time. Since the binary might not be available pre-built, it complicates the order of operations for the addition of CSE metadata structure and declaring hash and version as CPPFLAGS_common. Instead rules can be enabled for individual CBFS file targets for hash and version that ensure proper ordering as well. BUG=b:184892226 TEST=Ensured that update works correctly on brya by forcing version mismatch. In case of version match, no update is triggered. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7c9bb165e6a64415affcd0b3331628092195fa0d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel/cannonlake: Enable Energy/Performance Bias controlAngel Pons2021-10-151-0/+1
| | | | | | | | | | | | | | | | | Set POWER_CTL MSR bit 18 to enable Energy/Performance Bias control. TEST=Boot and verify EPB is enabled in coreboot log: cpu: energy policy set to 6 Change-Id: Ibd1db77b5b63cb6e2b0ad9d2f79caa2f3b576ead Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/qualcomm/sc7280: Enable compression of SHRMShelley Chen2021-10-152-5/+15
| | | | | | | | | | | | | | | | | | | | The SHRM region needs to be 4 byte aligned, which make enabling compression slightly more complicated. We need to map it to cached memory before loading it and flushing to memory (in aligned chunks) then remapping the address space back to device memory before beginning execution of the SHRM region. Also, did some cleanup in this file based on comments in CB:49392. BUG=b:182963902 BRANCH=None TEST=Make sure we can still boot to kernel on herobrine Change-Id: Iaad8a8a02abe40bd01766d94ef0b61aac7671936 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
* soc/amd/cezanne,picasso/uart: implement read_resourceFelix Held2021-10-152-2/+12
| | | | | | | | | | | | | Implement the read_resources function for the UART devices so that the resource allocator knows about their fixed MMIO resources when enabled. TEST=UART still works on Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4ffddee3f5f4281aca98ddfcefa639dfb7a38dae Reviewed-on: https://review.coreboot.org/c/coreboot/+/58306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* Revert "vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main"Hsuan-ting Chen2021-10-153-5/+0
| | | | | | | | | | | | | | This reverts commit 6260bf712a836762b18d80082505e981e040f4bc. Reason for revert: This CL did not handle Intel GPIO correctly. We need to add GPIO_EC_IN_RW into early_gpio_table for platforms using Intel SoC. Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Change-Id: Iaeb1bf598047160f01e33ad0d9d004cad59e3f75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57951 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/amd/common/block/lpc: simplify eSPI part of MakefileFelix Held2021-10-151-8/+1
| | | | | | | | | | | Since espi_util.c is also built in the case of verstage on PSP, we can just add it to all stages. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I65e07c356aac73c5de2d9ce5582434872a223c19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/intel/alderlake: fix NULL pointer dereferenceSelma Bensaid2021-10-151-5/+7
| | | | | | | | | | | microcode_file could be NULL and passed to get_microcode_size, this was detected by klocwork scan. Signed-off-by: Selma Bensaid <selma.bensaid@intel.com> Change-Id: Ibb3d49ab18d8c26bbf5d6bf6bdf1bf91137f5736 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel/broadwell/pcie.c: Simplify AND-maskAngel Pons2021-10-151-2/+2
| | | | | | | | | | | | | There's no need to mask out bit 11, as it is unconditionally set. For some reason, this changes the resulting coreboot image. Also simplify another PCI operation with a redundant AND-mask. Change-Id: I5492acd5f9c61db83a07ce7c1f6b887768c3eadf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
* soc/intel/common/cse: Reorganize firmware update checks for CSE LiteFurquan Shaikh2021-10-141-57/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | `cse_fw_update()` is currently checking whether an update is required by comparing versions once and then again comparing versions later in `cse_is_downgrade_instance()` to determine if the update is an upgrade or downgrade. Additionally, if CSE RW partition is corrupt (determined based on `cse_is_rw_bp_sign_valid()`), `cse_is_downgrade_instance()` ends up using the corrupted version information to determine if it is a downgrade instance. This change reorganizes the firmware update checks to return different status values: 1. CSE_UPDATE_NOT_REQUIRED: No update required. Versions match. 2. CSE_UPDATE_UPGRADE: Update required and it is an upgrade. 3. CSE_UPDATE_DOWNGRADE: Update required and it is a downgrade (requires data clear). 4. CSE_UPDATE_CORRUPTED: `cse_is_rw_bp_sign_valid()` failed and hence requires data clear. 5. CSE_UPDATE_METADATA_ERROR: Unable to read CSE metadata from CBFS. This change also prepares the file for follow up changes which completely drop cse_rw_metadata structure. BUG=b:184892226 Change-Id: Iabecab8e373e65a11ba7fe1bfc125467571a0588 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58157 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/amd/common/acpi/upep: Add Low Power State Entry NotificationsKarthikeyan Ramasubramanian2021-10-141-6/+28
| | | | | | | | | | | | | | | | | | | Add support to handle S0ix entry and exit notifications by adding the corresponding _DSM functions. The function indices are chosen based on the Modern Standby BIOS Implementation Guide 56358 Rev. 1.04. Inside the notification functions perform any mainboard specific S0ix entry and exit actions. BUG=b:195748540 TEST=Build and boot to OS in Guybrush. Ensure that the notification functions are invoked on S0ix entry and exit. Perform suspend/resume cycles for multiple iterations. Change-Id: I3014551f6e281d466628559453a0141a3dd6abad Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58274 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* src/soc/amd/cezanne: enable clock gatingJulian Schroeder2021-10-132-0/+34
| | | | | | | | | | | | | | | | Enabling clock gating for CGPLL to lower power consumption in S3 and S0i3 states. See also: Cezanne PPR chapter 7, rev 3.03. BUG=b:185273565 TEST=iotools mmio_read32 0xfed80e2c and 0e30 show clk gating enabled and suspend_stress_test works. Change-Id: I33cbdeec62e49db90b680da37e5028df03a9c015 Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/intel/common/tcss: Optimize USB-C DP flow and code structureDerek Huang2021-10-132-39/+43
| | | | | | | | | | | | | | | | | | | | | HPD event may not be ready when configuring TCSS mux for DP, check if any DP device is connected and wait for HPD ready before TCSS configuration. Remove unnecessary dependency on mainboard functions, use generic interface which provides USB-C mux operations. BUG=b:192947843 TEST=select ENABLE_TCSS_DISPLAY_DETECTION in Kconfig.name for Brya. Build coreboot and update your Brya. Boot Brya with USB-C display connected, you should find `HPD ready after %lu ms` and `Port C%zd is configured to DP mode!` in coreboot log. Display should show screen in developer mode or recovery mode. Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: Ia7e6dd952d3183ecb76de6d4887ee573ef89bb50 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel: drop P_BLK supportMichael Niewöhner2021-10-1314-76/+9
| | | | | | | | | | | | | | P_BLK is legacy and superseded by ACPI _CST. Also, the implementation for most platforms in soc/intel is broken. Thus, drop it. For APL the IO redirection is kept since it's used as replacement for the broken MWAIT instructions. Change-Id: I489aa7886dd9a4c1e6c12542bc2a1feba245ec36 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* soc/amd/common/block/spi: Support fast speed overrideKarthikeyan Ramasubramanian2021-10-132-0/+7
| | | | | | | | | | | | | | | | | | Add support to override SPI ROM fast speed based on board version. This will allow boards to start at lower speeds during bringup and then switch to higher speeds after assessing the signal integrity. Also implement a default no-op override. BUG=None TEST=Build and boot to OS in Guybrush. Perform S5->S0, G3->S0, warm reset and suspend/resume cycles for 50 iterations each. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ia8ff3b3bdb53fee142527ae63aa7785945909304 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/amd/common: Add support to read and set SPI speeds from verstageKarthikeyan Ramasubramanian2021-10-136-4/+12
| | | | | | | | | | | | | | | | | | | Currently all SPI speed configurations are done through EFS at build time. There is a need to apply SPI speed overrides at run-time - eg. based on board version after assessing the signal integrity. This override configuration can be carried out by PSP verstage and bootblock. Export the APIs to set and read SPI speeds from both PSP verstage and bootblock. BUG=None TEST=Build and boot to OS in guybrush. Perform S5->S0, G3->S0, warm reset and suspend/resume cycles for 50 iterations each. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I281531e506b56173471b918c746f58d1ad97162c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/amd/common/block/espi_util: Refactor eSPI SetupKarthikeyan Ramasubramanian2021-10-135-22/+17
| | | | | | | | | | | | | | | | | | | eSPI is setup in two different locations in bootblock depending on early port80 routing configuration. Also eSPI is setup in PSP, if verified boot starts before bootblock. Consolidate all the scenarios by initializating eSPI very early in fch_pre_init if verified boot starts after bootblock and eSPI is enabled. BUG=None TEST=Build and boot to OS in Guybrush. Perform S5->S0, G3->S0, warm reset and suspend/resume cycles for 50 iterations each. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Icfeba17dae0a964c9ca73686e29c18d965589934 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/amd/*: Enable ACPIMMIO decode first in fch_pre_initFelix Held2021-10-133-3/+9
| | | | | | | | | | | | | | | | Since the GPIO mux/control MMIO regions are within the ACPIMMIO region, we need to call enable_acpimmio_decode_pm04 here first so that accessing the GPIO registers will work. BUG=None TEST=Build and boot to OS in Guybrush. Change-Id: I4bc076261c72cf999a5f2464b74cff6bf694d473 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/mediatek/mt8192: add tracker dumpZhenguo Li2021-10-133-4/+11
| | | | | | | | | | | | | Tracker is a debugging tool, include AP/INFRA/PERI tracker. When bus timeout occurs, the system reboots and latches some values which could be used for debug. Signed-off-by: Zhenguo Li <ot_zhenguo.li@mediatek.corp-partner.google.com> Change-Id: I82f8e6e5f8ccb7f8246cae45a01a3ddd5f2966f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58244 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/mediatek/mt8195: add tracker dumpZhenguo Li2021-10-135-5/+176
| | | | | | | | | | | | | Tracker is a debugging tool, include AP/INFRA/PERI tracker. When bus timeout occurs, the system reboots and latches some values which could be used for debug. Signed-off-by: Zhenguo Li <ot_zhenguo.li@mediatek.corp-partner.google.com> Change-Id: If457f4a096cd63038bf6b40552aa3caaba33d5fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/58243 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/amd/cezanne,soc/intel/common: rework CPPC table generationMichael Niewöhner2021-10-131-148/+29
| | | | | | | | | | | | | | | | Make use of the newly introduced ACPI macros for CPPC table generation that currently exists of a bunch of confusing assignments of structs that only get partially filled. Test: dumped SSDT before and after do not differ. Change-Id: I844d191b1134b98e409240ede71e2751e51e2159 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lance Zhao Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
* soc/amd/common/block/include/psp_efs: use unsigned type for bitfieldFelix Held2021-10-121-2/+2
| | | | | | | | | | | | | | | | For 1 bit long bit fields an unsigned type should be used. In this case uint32_t is used instead of a generic unsigned int for both consistency reasons with the rest of the file and to clarify that the bits will be packed into a 32 bit memory location. TEST=Resulting image of a timeless build for google/guybrush results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic630d1709174d90336746bc37da504437c12643c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/intel: replace dt option PmTimerDisabled by KconfigMichael Niewöhner2021-10-1215-49/+19
| | | | | | | | | | | | | | | | | | Replace the dt option `PmTimerDisabled` with use of the Kconfig option `USE_PM_ACPI_TIMER` for enabling/disabling the PM Timer. A default value representing the prior devicetree value was added to the boards system76/{lemp10,galp5,darp7}, so this change will not alter behaviour. Change-Id: If1811c6b98847b22272acfa35ca44f4fbca68947 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
* soc/intel/cannonlake: Lock PKG_CST_CONFIG_CONTROL MSRAngel Pons2021-10-121-1/+2
| | | | | | | | | | | | | Set PKG_CST_CONFIG_CONTROL MSR bit 15 to make bits 15:0 read-only. Change-Id: Ia196906d3c2636742ae90160a224354e8df7863a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel/*/cpu.c: Add missing space in commentAngel Pons2021-10-127-7/+7
| | | | | | | | | | | | Add a space before the `*/` C-style comment ending. Change-Id: Ic8928286c8237808b9e380e4393078792589615d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
* soc/amd/cezanne/include/southbridge: add some more PM register definesFelix Held2021-10-111-0/+4
| | | | | | | | | | Register and bit definitions are from the Cezanne PPR #56569 Rev 3.03. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib109efe679560604ff8209b4177611eb2aa9ebdf Reviewed-on: https://review.coreboot.org/c/coreboot/+/58068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/amd/common/include/lpc: add definitions for LPC LDRQ control bitsFelix Held2021-10-112-0/+8
| | | | | | | | | | | | | | | | | | The definitions of bit 9 and 10 somehow got swapped between Picasso and Renoir/Cezanne, so put those in the Cezanne-specific header file. The reference code writes the same values to the raw bits in both, so we probably would still get away with putting this into the common header, but it's better to keep the defines consistent with the documentation in all cases. Register and bit definitions are from the Cezanne PPR #56569 Rev 3.03 and cross-checked to be compatible with the Picasso PPR #55570 Rev 3.16. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3a033d63eeb06eed6783e4c3797ad8dea490db8d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
* soc/intel/tigerlake: Add ACPI addition for USB4/TBT latency optimizationJohn Zhao2021-10-111-0/+59
| | | | | | | | | | | | | | | | | | The PCI-SIG engineering change requirement provides the ACPI additions for firmware latency optimization. This change adds additional ACPI DSM function with both of FW_RESET_TIME and FW_D3HOT_TO_D0_TIME to the USB4/TBT topology. The OS is informed to reduce latency for upstream ports while connecting USB4/TBT devices. BUG=b:199757442 TEST=It was validated that the first connected device waits only 50ms instead of 100ms and all functions work on Voxel board. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I5a19118b75ed0a78b7436f2f90295c03928300d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* drivers/intel/dptf: Add support for PCH methodsSumeet Pawnikar2021-10-111-4/+10
| | | | | | | | | | | | | | | Add various methods support for pch device under dptf driver. This provides support of different control knobs for FIVR. BUG=b:198582766 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: I2d40fff98cb4eb9144d55fd5383d9946e4cb0558 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* soc/intel/dnv_ns: drop redundancies from soc_fill_fadtMichael Niewöhner2021-10-111-26/+0
| | | | | | | | | | | Drop overrides from `soc_fill_fadt` that do not differ from what common ACPI code already sets. Change-Id: I7a5f43f844b12ff0e9bc5c7426170383209c8e0a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* soc/intel/dnv_ns: add the Kconfig value for CPU_XTAL_HZMichael Niewöhner2021-10-091-0/+3
| | | | | | | | | | Reference: Intel doc#558579 rev2.2 Change-Id: Iab5dca6eb42abc00bc7da33f640350e994f0bd02 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* soc/intel/tigerlake: Hook up GMA ACPI brightness controlsTim Crawford2021-10-074-0/+28
| | | | | | | | | | | | | | | Add function needed to generate ACPI backlight control SSDT, along with Kconfig values for accessing the registers. Tested by adding gfx register on system76/gaze16 and booting Windows. Display settings has a brightness setting, and can change the brightness level. Change-Id: Id8b14c0b4a7a681dc6cb95778c12a006a7e31373 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-16 00:03:54 +0000