summaryrefslogtreecommitdiffstats
path: root/src/mainboard/google/brya/variants/vell/gpio.c
Commit message (Collapse)AuthorAgeFilesLines
* mb/google/brya: Implement touchscreen power sequencingMatt DeVillier2023-08-091-0/+6
| | | | | | | | | | | | | | | | | | For brya variants with a touchscreen, drive the enable GPIO high starting in romstage while holding in reset, then disable the reset GPIO in ramstage (done in the baseboard). This will allow coreboot to detect the presence of i2c touchscreens during ACPI SSDT generation (implemented in a subsequent commit). BUG=b:121309055 TEST=tested with rest of patch train Change-Id: I8e56ac4834ce69de18bef2d34f5c361a7fda1aab Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
* mb/google/brya: Invoke power cycle of FPMCU on startupTarun Tuli2022-09-091-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add functionality such that the FPMCU is power cycled and has its reset sequenced on boot. This has been added such that we do not need to update the bootblock. We are required to do this as bootblock exists in read-only flash for devices that have already been manufactured and so have no method of updating the sequencing there. Power remains off during coreboot (after briefly being turned on in the unchangeable bootblock). Once control is handed over to the Kernel, it takes care of sequencing the power and reset appropriately and ensures the FPMCU is unpowered for >200ms on boot. BUG=b:240626388 TEST=Confirmed FPMCU is still functional on Vell and Anahera. Confirmed power is off for approximately 6 seconds on boot (target >200ms). Confirmed reset is de-asserted approx 5ms after power application (target >2.5ms) Change-Id: I9694f8837e0a72eaed42a5eeee92b0f120269086 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66915 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/brya/var/vell: Set GPP_B2 NC for RGB keybaordRobert Chen2022-08-051-1/+1
| | | | | | | | | | | | | | | When GPP_B2 output high, there is a leakage path. This patch fix it by setting the pin NC. BUG=b:233959105 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: I3c833d5d62c715960dcb27494a0b9b93c91e8f2f Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
* Revert "mb/google/brya/var/vell: Remove unused i2c7 settings"Shon Wang2022-05-301-4/+4
| | | | | | | | | | | | | | | | | This reverts commit bd9cec8ae5755e898d107fd061fc2e2f983552b9. Reason for revert: Enable i2c7 for amp changing to 2 channel because vell setting amp on i2c0 and i2c7 on next phase BUG=b:229334701 TEST=emerge-brya coreboot chromeos-bootimage && $powerd_dbus_suspend && checks EC log and ensures the DUT could enter s0ix. Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Change-Id: I5988cd9926b2c9ced1d111774abaa897bef91537 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/brya/var/vell: Remove unused i2c7 settingsGaggery Tsai2022-05-051-4/+4
| | | | | | | | | | | | | | | | This patch removes unused i2c7 settings. Accroding to EVT schematic, i2c7 is reserved for AMP but resistors are unstuffing. BUG=b:229334701 TEST=emerge-brya coreboot chromeos-bootimage && $powerd_dbus_suspend && checks EC log and ensures the DUT could enter s0ix. Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Change-Id: Ifc1e0085064a13149ebc7e70184d1f40462e0fff Reviewed-on: https://review.coreboot.org/c/coreboot/+/63892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/brya/var/vell: add WWAN power sequence setting for vellRobert Chen2022-04-121-2/+15
| | | | | | | | | | | | | | Add WWAN power sequence setting to meet spec BUG=b:220084872 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: If6d3f965b8f6b6753446f55a8bd47d3b0c1ae7be Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/brya/var/vell: Change AMP driver settingShon Wang2022-03-181-4/+4
| | | | | | | | | | | | 1.Change I2S GPP_Sx (S0-S3) Native PAD Configuration from NF2 to NF4 2.Select CS35l53 AMP driver for Vell variant. Change-Id: I96d49bd1a2ba061c4fd52b450b31d0885f49552c Signed-off-by: Shon.Wang <shon.wang@quanta.corp-partner.google.com> Signed-off-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/brya/var/vell: update gpio for DMICShon Wang2022-02-141-4/+4
| | | | | | | | | | | | | | | | | Data on channel 0 & 1 are normal (from DMIC) but there is noise on channel 2 & 3, so change to NF PAD_CFG_NF(GPP_R6, NONE, DEEP, NF4) to PAD_NC(GPP_R6, NONE), PAD_CFG_NF(GPP_R7, NONE, DEEP, NF4) to PAD_NC(GPP_R7, NONE), BUG=b:210802722 TEST=FW_NAME=vell emerge-brya coreboot Change-Id: I1b5ccd2c239e526e4f1ce2d5ed6c1386303590c8 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61033 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* mb/google/var/vell: Add gpios to lockEric Lai2022-02-091-11/+11
| | | | | | | | | | | | | | | | Variant should honor locked gpios from baseboard, but not the last. Variant can add more gpios to lock if needed. BUG=b:216583542 TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that vell boots successfully to kernel. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I0c39d06e3b2f39db88d924205786bfa1b27df3fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/61704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
* mb/google/brya: Lock TPM pin in brask and brya baseboardsSubrata Banik2022-02-021-0/+4
| | | | | | | | | | | | | | | | This applies a configuration lock to the TPM I2C and IRQ GPIO for all brya and brask variants. BUG=b:208827718 TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests I2C_TPM_SDL and I2C_TPM__SDA GPIO PINs are locked. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4f2a7014faeecd4701ea35ec77ef0e1692516b9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/61499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/brya/var/vell: Add MIPI camera infoShon Wang2022-01-071-0/+2
| | | | | | | | | | | | | | Add OVTI8856 information for vell: BUG=b:210801553 TEST=Build and boot on vell Change-Id: I43de859cd0cdd9fe21c16cabfad511ed0b368ee3 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
* mb/google/brya/var/vell: Swap TPM I2C with touchscreen I2CShon Wang2022-01-071-4/+4
| | | | | | | | | | | | | | | | According to the latest schematic for the next build phase, exchange I2C port for TPM/touchscreen. TPM: I2C3 -> I2C1 Touchscreen: I2C1 -> I2C3 BUG=b:210572663 TEST=FW_NAME=vell emerge-brya coreboot Change-Id: If72717a2c073f5b871c3109399f466a04a9d2484 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* mb/google/brya/var/vell: update gpio overrideKevin Chiu2021-12-201-0/+177
Configure GPIOs according to schematics BUG=b:205908918 TEST=emerge-brya coreboot Change-Id: Icc91866f7555c294af7eed9e5d1550e73d8059d0 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-08 08:44:53 +0000